Department Of Mechanical Engineering Introduction Mission Chair Department Salient Features of Department Teaching Faculty Academic Resources Program Educational Objectives(PEOs) Program Learning Outcomes(PLOs) Scheme Of Studies Programs Offered

Department of Mechanical Engineering

Lights

Dr. Zabdur Rehman

Assistant Professor

Ext: +92-57-9153-225

Email:[email protected]


Dr. Zabdur Rehman

Assistant Professor

ZABD UR REHMAN received his B.S. degree in Mechanical engineering from Ghulam Ishaq Khan Institue, Pakistan, in 2011, and then master's leading to PhD degree in Mechainal engineering from the Department of Department of Mechanical, Robotics and Energy Engineering, Dongguk University, Seoul, South Korea, in 2018. He served as assiatant professor in Department of Mecahinal Engineerign at Wah Engineerign College, Univerity of Wah for 1.5 years. He is currently working as Assistant Professor and Cahir at the Department of Mechanical Engineering, Air University Islamabad, Aerospace and Aviation Campus Kamra, Pakistan. His areas of research include Heat sinks, Heat transfer, Nano fluid, Micro Channel Heat Sinks(MCHS), Computational Fluid Dynamics, Renewable energy, Carbon capture and Storage (CCS), and Ejectors and it’s modelling techniques.


Muhammad Usman, Z. Rehman, K. Seong, S. Lee, and M. H. Song, “In Situ Determination of Solid Fraction from the Measured Hydrate Slurry Flow Rate and Pressure Drop Across Orifice", Applied Sciences. (Published, IF= 2.474) Muhammad Usman, Z. Rehman, K. Seong, S. Lee, and M. H. Song " Vacuum Degassing of Aqueous Tetrafluroethane (R134a) Solution During Seawater Desalination Utilizing Gas Hydrate", Desalination. (Published, IF= 7.09) Z. Rehman et al. " Revealing the Effects of Microarc Oxidation on the Mechanical and Degradation Properties of Mg-Based Biodegradable Composites ", ACS Omega, https://doi.org/10.1021/acsomega.0c00836 (Published, IF= 2.584) Hafiz Ali Muhammad, Beomjoon Lee, Z. Rehman, Young-Jin Baik " A comprehensive thermodynamic performance assessment of CO2 liquefaction and pressurization system using a heat pump for carbon capture and storage (CCS) process", Energy Conversion and Management,(Published, IF= 7.181) Z. Rehman, K. Seong, S. Lee, and M. H. Song, "Experimental Study on the Rheological Behavior of Tetrafluoroethane (R-134a) Hydrate Slurry," Chemical Engineering Communications, doi:10.1080/00986445.2017.1422494 (Published, IF= 1.431) Z. Rehman and K. Seong, "Three-D Numerical Thermal Analysis of Electric Motor with Cooling Jacket," Energies, vol. 11, p. 92, 2018, doi :10.3390/en11010092 (Published, IF= 3.045) Z. Rehman et al., “Numerical Modeling of Ejector and Development of Improved Methods for the Design of Ejector Assisted refrigeration system,” Energies. (Published, IF= 3.045) Z. Rehman et al., “Design and Fabrication of Solar Thermal Energy Storage System Using Potash Alum as a PCM,” Energies. (Published, IF= 3.045) Z. Rehman et al., “Application of advanced exergy analysis for optimizing the design of carbon dioxide pressurization system,” Energy. (Published, IF = 6.08) Z. Rehman et al., “Thermo-fluid Characteristics of Microchannel Heat Sink with Multi-configuration NACA 2412 Hydrofoil Ribs,” IEEE ACCESS. (Published, IF = 3.36) Z. Rehman et al., “Heat transfer augmentation through different jet impingement techniques – A state-of-the-art review,” Energies. (Published, IF = 3.004) Z. Rehman et al., “Thermal Performance Investigation of Slotted Fin Minichannel Heat Sink for Microprocessor Cooling,” Energies. (Published, IF = 3.004) Z. Rehman et al., “Minimizing the Casting Defects in High Pressure Die Casting Using Taguchi Analysis,” Scientia Iranica. (Published, IF = 1.435) Z. Rehman et al., “Effect of Cross-Sectional Geometry on Hydrothermal Behavior of Microchannel Heat Sink,” Journal of Non- Equilibrium Thermodynamics. (Published, IF = 3.328) Z. Rehman et al., “Comparison of Ground-Based Global Horizontal Irradiance and Direct Normal Irradiance with Satellite-Based SUNY Model”, Energies. (Published, IF = 3.004) Z. Rehman, Faraz Ahmad, Hafiz Ali Muhammad, Hafiz Muhammad Uzair Ayub, Fahid Riaz, Mudassir Hasan, Moonyong Lee., “Study of Thermal Characteristics of Energy Efficient Micro Channel Heat Sinks in Advanced Geometry Structures and Configurations: A Review”, Frontiers in Energy Research. (Published, IF = 4.008) Z. Rehman et al., “Analysis of Solar PV Technology Adoption in Off-Grid Communities of Khyber Pakhtunkhwa”, IJEW. (Published) Z. Rehman et al., “Thermal Management of Microprocessor using TiO2-H2O mixture (Anatase-Rutile) Nanofluids,” Journal of Thermal Analysis and Calorimetry. (Under Review) Z. Rehman and K. Seong, “Experimental Investigation of Pressure Losses for Tetrafluoroethane Hydrate Slurry in Pipe Fittings," Experimental Thermal and Fluid Science. (Submitted) Book Chapter: Z. Rehman et al. “Exergoeconomic optimization of binary geothermal power plants”, Thermodynamic Analysis and Optimization of Geothermal Power Plants, Elsevier, 2020, Ch-19 International Conferences: Hafiz Ali Muhammad, Beomjoon Lee, Z. Rehman, Young-Jin Baik, “Investigation of CO2 liquefaction and pressurization system using Heat Pump", The 6th International Conference of Saving Energy in Refrigeration and Air-Conditioning, Seoul, Korea, 12th - 15th March, 2019. Z. Rehman, K. Seong, S. Lee, and M. H. Song" Experimental Investigation of Tetrafluoroethane (R-134a) Hydrate Slurry Flow in Pipeline of Complex Configuration", 9th International Conference on Gas Hydrates, Denver, Colorado, 25-27th July,2017. (Published in Conference Proceedings) Muhammad Usman, Z. Rehman, K. Seong, S. Lee, and M. H. Song" Degasification of Aqueous Tetrafluroethane (R-134a) Solution Produced by Hydrate Decomposition during Sea Water Desalination", 9th International Conference on Gas Hydrates, Denver, Colorado, 25-27th July,2017. (Published in Conference Proceedings) Regular reviewer of Energy Conversion and Management Google Scholar Profile:https://scholar.google.com/citations?user=KSrFpGcAAAAJ&hl=en

Copyright © Air University Kamra Campus.
All right reserved.